PANASONIC “9 BT-LH910G

מוניטור LCD "9 מקצועי ברזולוציה 768*1280 בעל יכולת המרה ושרשור סיגנל וידאו

9" 1280*768 3G-SDI & HDMI Monitor
Waveform Monitor & Vectorscope
3D LUT Look Up Table
Built-in I/P Conversion Circuit
176° U/D, L/R Viewing Angle
Peaking, 1:1 Pixel-to-Pixel
Closed Caption and Timecode Display

The Panasonic BT-LH910GJ 9″ LCD HDMI / SDI Field Monitor (Gold Mount) features a native resolution of 1280 x 768 and supports video signals up to 1920 x 1080p. The monitor is suitable for use as an on-camera monitor as well as a production monitor when using the included tilt stand. Incorporating a variety of useful features including a waveform monitor and vectorscope for exposure assist, peaking is supported for focus confirmation. 1:1 movable pixel-to-pixel mode allows you to view your video image in sections without scaling artifacts.

More than just a simple on-camera monitor, the BT-LH910GJ supports both closed captioning and timecode. It supports a variety of aspect ratios including 16:9, 4:3, 13:9, 14:9, CNSCO2.39, CNSCO2.35, 2:1, or Vista. The Cine-gamma conpensation mod allows you to use the monitor for Varicam footage, and the built-in black mode makes dark images easier to see. You can display audio embedded in both the SDI and HDMI stream, and a built-in headphone jack allows you to hear your audio.

Features IPS LCD panel and 16.7 million colors

Displays video signals on its 1200 x 768 screen and supports other resolutions up to 1920 x 1080 by scaling.

Aspect ratio display of 16:9 supports 4:3, 13:9, 14:9, CNSCO2.39, CNSCO2.35, 2:1, or VISTA, with background brightness control of Black (0%), Half (50%), or Normal (100%).

Cross Hatch Overlay: Displays grids with 40 or 80 pixel intervals. This is useful for horizontal/vertical adjustment.

HV Delay Display: Displays the video blanking period.

Mono Mode: Displays images in black-and-white.

Split Screens: A frame of video can easily be frozen and displayed as a still image on the left side of the screen. This function can be used to match a live camera with a frame of video shot at an earlier time or with a different camera.

Uses 3-dimensional LUT (Look Up Table) that provides a normalized image.

10-bit image processing provides accurate color reproduction from low to high brightness levels for each RGB color levels

Diagonal line compensation circuit reduces uneven noise on diagonal lines

Built-in I/P conversion circuit offers minimal delay of one field between input and panel display to provide excellent motion response

RGB bias and gain function allows for fine tuning of color balance levels and facilitates color matching with other types of monitors.

Allows color compensation in 256 discrete RGB steps to conducted for the each monitor to reproduce rated gamma properties (g = 2.2)

Pre-installed software enables calibration without using a PC by connecting compatible color analyzer and measurement probe to the monitor.

Equipped with cine-gamma (F-REC) compensation function.

Featured black mode displays dark images clearly in scenes with low-gradation and assists in producing movies, film-like HD programs, and commercial movies.

Featured audio level meter displays the embedded audio level for inputs such as 3G-SDI (serial digital interface), SDI, and HDMI.

Audio level features reference point setting, peak hold, and over-range display functions. HDMI embedded audio is limited to two channels.

Using Y, R,G and B, the input signal for the waveform display can be selected

focus peaking highlights sharply focused area of the image by displaying it in red color for easy viewing, and focus confirmation.

Pixel-to-pixel mode displays images in their native resolution by avoiding the monitor’s internal scaling function.

Supports EIA-708, EIA608 closed captioning standards

Can display up to 8 windows at the same time

Supports LTC (linear time code), VITC (vertical interval time code), and UB (user bit) types of time codes

Can control all on-screen markers; applicable for center markers, safe area markers, and 16:9 markers using marker settings.

Incorporates Cross Hatch Overlay function that displays 40 or 80 pixel intervals grids, which is useful for horizontal/vertical adjustment.

H/V Delay displays video blanking period that is time difference between the last line of one video frame and start of the first line of the next video frame

Can overlay the left/right eye signals from a 3D camera to the 2 SDI input terminals

Supports functions such as mirror, shift, comparison, convergence, color, zoom focus, vertical, and overlay

Incorporates 3 function keys to assign various functions such as HV Delay, Blue Only, Gamma Select, SD Aspect, Scan, Sub Window, WFM, Vector, Marker, White Balance, Pixel-To-Pixel, Pixel Position, Focus-In-Red, Zebra, Rear Tally, Level Meter, Cross Hatch, Mono, Black Mode, Time Code, Closed Caption, and Undef

Features input terminals for signals such as 3G-SDI, SDI (HD and SD), HDMI, composite (Video), and component (YPBPR).

An optional viewfinder cable allows you to connect the monitor to compatible Panasonic cameras and use it as a viewfinder.

Can be used as a viewfinder for compatible Panasonic camera recorders (requires optional cable)

Features split screen and supports color temperature functions

Monitor

Monitor - COLOR	Approx. 16,770,000 colors
Monitor - OUTPUT	M3 stereo mini jack x 1
Monitor - RESOLUTION	1280×768 WXGA
Monitor - SIZE	23cm (9 inches) of effective display area
Monitor - WEIGHT	1.7kg 3.7lbs