EN

רשימת ההשכרה

לא קיימים פריטים ברשימה שלכם
DJI השיקה גרסה קטנה של מייצב - ה Ronin M שמשקלו כמחצית מזה של ה- Ronin המקורי. הגרסה הקטנה מתאימה למצלמות השוקלות עד 3.6 קילו ומיועדת למצלמות קטנות כגון A7s של סוני, DSLR למיניהן, מצלמות של Blackmagic וכו'. המייצב RONIN-M הוא מתקן ייצוב תלת צירי למצלמה המבוסס על שלושה ג'יירוסקופים. שלושת הג'יירוסקופים מייצבים את המצלמה בציר ה- Pan, בציר ה- Tilt, ובציר ה- Yawing (סיבסוב), מה שאומר שעדשת המצלמה תשמור על יציבותה בכל מצב. ניתן לשלוט על הגימבל ע"י טאבלט/מכשיר סלולרי דרך האפליקצייה, כאשר למפעיל מצטרף מפעיל נוסף השולט על תנועות המצלמה ובאופן כזה ניתן בשליטה מרחוק לבצע תנועות מצלמה בנוסף לייצובה.
  • Supports Cameras up to 8 Pounds
  • Precision of Control: ±0.02°
  • Transmitter for Remote Pan/Tilt Control
  • Tool-Less Balance Adjustment System
  • Assistant Software for iOS and Windows
  • Bluetooth Wireless Interface for Setup
  • Silent Mode For Quiet Operation
  • USB and PowerTap Power Outputs
מק"ט POD-RNM
כמות:

The Ronin-M 3-Axis Handheld Gimbal Stabilizer from DJI is a camera stabilization system designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake. Suitable for most camera types and configurations up to 8 pounds, the Ronin-M uses brushless motors that work on three axes: one for side-to-side "roll" – keeping the horizon level – one for tilt, and one for pan. The system is computer-controlled and features a tilt range of 105⁰ up / 165⁰ down plus a roll range of ±110⁰. Furthermore, the system boasts a precision of control of ±0.02°, enabling precise camera moves and stability correction against even very fine movements. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support systems unsuitable.

The Ronin-M supports dual-operator shooting, much like working with a jib that has a motorized pan/tilt head. In this mode, a second operator would use the included transmitter (radio controller) to manually control camera pan and tilt independently of which way the Ronin-M itself moves. The included transmitter/receiver system operates on 2.4 GHz and is proprietary. If you prefer to use a third-party transmitter there is a D-Bus port on the Ronin-M to install your own receiver.

As with sled and vest style stabilizers, motorized gimbal systems require balancing before use. Once balanced, you can configure the Ronin-M for your particular camera arrangement using the Assistant Software for compatible iOS and Windows (Desktop) devices with Bluetooth. Because every camera and lens combination has a different mass and weight distribution, there is an ATS (Auto Tune Stability) procedure in which each axis will adjust individually, repeating the process until all three are aligned. A gimbal tuning stand is provided so you won't have to hand-hold the rig during this process.

The included 4S lithium-polymer battery powers the Ronin-M for up to six hours. It is a "smart" battery, meaning power regulation and protection circuitry is built-in and there is no separate balancing lead, unlike many lithium-polymer batteries. A charger is also included, and it is important to always use chargers designed for the Ronin-M battery because of the smart circuitry. Two 12V DC PowerTaps and one USB power port on the camera base allow you to power on-camera accessories directly from the Ronin-M battery to simplify your charging regime and avoid unnecessary added weight.

For Cameras Up to 8 lb
The Auto Configuration feature means the Ronin-M can adapt to a range of camera sizes, and is ideally suited for compact video cameras, mirrorless cameras, and DSLRs. It is suitable for payloads up to 8 pounds.
SmoothTrack Control
SmoothTrack gives a single gimbal operator the ability to translate their tilt and pan movements of the gimbal into smooth and stabilized movements of the camera's angle. This is designed to make framing of broad wide-angle scenes or even shooting in close quarters much easier during single gimbal operator use.
Auto Configuration
After balancing the camera with a simple tap of the ATS (Auto Tune Stability) button, Ronin-M will be automatically tuned for the mass and weight distribution of your camera rig. The gimbal will intelligently adjust parameters based on the camera rig's weight and independently adjust each of the three axes until an optimal setting is found.
Three Operation Modes
Upright Operation Mode
Upright Mode allows the gimbal to be flipped over so the camera can be operated closer to eye level without straining to lift the gimbal. This can be used in various situations, such mounting on the top of the vehicle.Underslung (Suspended) Operation Mode
Suspended Operation Mode is the standard operation mode for Ronin-M. Low slung, close to the ground, or simply holding the gimbal in front of you offers stabilized handheld footage. This mode would also be used when mounted the gimbal on a flying platform such as a multirotor RC helicopter.Briefcase Mode
When a slimmer gimbal profile is needed – such as when moving through doorways or narrow paths – Briefcase Mode is ideal. It allows the gimbal to be held to the side and close to the legs, much like a briefcase.
שלט ל RONIN
סטנד לRONIN-M - שני חלקים
באר לידית צד
ידית עליונה למיני רונין
ידית צד
קוויקסט ל RONIN
תומך עדשה - 2 חלקים
אייפד מיני
מפתח אלן
קייס קשיח

ייתכן ותאהב גם...

FREEFLY MOVI PRO

כמות:

TIFFEN Steadicam Flyer

כמות:

DJI Ronin

כמות: